Shops and operators
A retail refurbishment programme needs a demolition scope for each store
A common refurbishment design can produce different demolition work in different stores. The new counters and finishes may be standard, while the old partitions, ceilings and floor build-ups are not. A GC preparing several locations needs to connect the shared design to the existing construction at each address.
Bolan provides commercial strip-outs in Oakville and across the GTA. For a retail programme, the useful starting point is the proposed design together with a location-by-location comparison of the removals it requires.
Separate the standard design from the existing fit-out
List the elements the programme intends to replace: counters, display joinery, fitting rooms, partitions, flooring or selected ceilings. Then compare the current premises with that list.
| Common design item | Why the removal can differ by store |
|---|---|
| New sales counter | Existing counter footprint, attachments and service connections differ |
| Revised display layout | One shop has loose fixtures; another has attached joinery or partitions |
| Replacement flooring | Existing layers and retained fixtures create different removal edges |
| Retained shopfront | Adjacent walls, ceilings and internal fit-out meet it differently |
The aim is comparable scope descriptions, not an assumption that every location contains the same work. Record confirmed differences before asking for a common programme approach.
Keep the shopfront decision visible
Many refits change the interior while retaining the frontage. The removal boundary should identify how the old fit-out meets the retained frame, glazing and adjoining finishes. Bolan’s retained-shopfront guide develops that interface.
A store inside a shopping centre may also have different building instructions and access from a street-front premises. Obtain those arrangements for each property. A standard design cannot establish a universal loading route or work period.
Use an initial store to improve the next enquiries
The first assessment can reveal a missing detail in the design package: an undefined ceiling limit, a counter connection or a floor condition the receiving installer needs. Carry the clarified question forward to the other locations.
Carry the answer forward only where it has been confirmed for that store. Hidden construction and previous alterations can differ. This distinction lets the programme become better informed without turning the first location into an unsupported template for all the others.
Where the design changes after the removal scope is prepared, use the drawing-change guide to keep the affected location and revision clear.
Illustrative comparison: one counter design, two removals
This is an illustrative planning example, not a completed Bolan programme.
Two stores will receive the same new counter. One has a freestanding fixture and a largely reusable surrounding floor. The other has attached joinery, connected fittings and a different footprint in the existing finish. Their removal packages identify those differences and the receiving floor condition separately.
The new counter design stays consistent while the demolition descriptions remain accurate. The programme’s sequence and accepted capacity can then be discussed against real work at real locations.
Start with the locations ready for assessment
Discuss the refurbishment programme with Bolan. Provide the first store addresses, current design revision and intended order. Identify retained shopfronts, building contacts and unresolved finish or service interfaces. Each confirmed scope contributes to a more useful programme discussion.